Home > Agriculture > Hay

Hay moisture meter, FX-2000

Moisture meter

Name: Hay moisture meter, FX-2000
Material: Hay, Straw, Windrow, Bales, Baling
Mc: 6-40% on hay
Calibrations: Hay
Overview This state-of-the-art moisture meter for hay is ideal for high-volume producers who need the time-saving convenience of on-the-go monitoring. Whether in the windrow, on-the-go while baling, or in the bale, the FX-2000 gives clear, accurate moisture readings every step of the way!
Your Benefits: Bright, clear digital display Can be used for on-the-go moisture monitoring or as a portable meter In continuous mode: Takes two readings every second Displays the average and highest of eight accumulated readings Readings updated every 4 seconds Built-in back light Connects to tractor power supply In portable mode: Averages up to 100 accumulated readings Displays average and highest of accumulated readings Moisture Range: 6%-40% on hay Built-in calibration check Audible, adjustable alarm alerts you when a pre-selected MC has been reached Operating Temperature: from 0° to 50°C Size: 20x8x4cm (8x3x1⅝”) Weight: 285gr. (10 oz) Rugged construction ensures years of reliable use Optional sturdy plastic carrying case 9V battery 3-year warranty
Special Packages: Moisture meter FX-2000 value Package: Includes meter with power supply, 1986 bale sensor with cable and mounting bracket. Moisture meter FX-2000 Deluxe Package: Includes meter with power supply, 1986 bale sensor with cable and mounting bracket, H-4 handle, 830-2 25cm (10”) pen electrode, 831 windrow electrode, and carrying case. Moistue meter FX-2000 Deluxe 18 Package: Includes meter with power supply, 1986 bale sensor with cable and mounting bracket, H-4 handle, 830-3 45cm (18”) pen electrode, 831 windrow electrode, and carrying case.

Hay moisture meter, FX-2000

Electrodes

	1235 Pen electrode available in 2 lengths: 1235 – 25cm (10”) 1235/18 – 45cm (18”) (Attaches directly to the connector on top of the meter) Benefits For moisture measuring in standard bales
	830-X Pen electrode available in different lengths: 830-2 – 25cm (10”) 830-3 – 45cm (18”) 830-4 – 90cm (36”) (Requires H-4 Handle) Benefits For moisture measuring in standard and high density bales
	831 Short needle electrode (Requires H-4 Handle) Benefits Multi-pin probe, for testing MC of hay in the windrow and other loose material
	H-4 Handle for electrodes 830-x, 831 and 832 Benefits Useful for large or high density bales. Two handed operation is recommended over using an electrode that connects directly to the top of the meter (like our 1235 series) to minimize stress placed on the meter casing.
	1986 Comes with 900cm (30’) cable to run from the sensor mounted in the bale chamber to the meter in the cab. Also available as 1986/40 with 1200cm (40’) cable for larger balers Benefits For continuous monitoring during baling
	2110 Split bale chamber sensor Benefits For use with Freeman balers

Hay moisture meter, FX-2000

Accessoires

	MCS-5 This moisture content standard is great for verifying that your F-series moisture meter is in calibration. With two electrical resistance values (10% and 20%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy.
	1985 Replacement 9 mtr (30ft) coaxial cable for # 1986 bale chamber sensor. Also available in 11 mtr (36ft) and 12 mtr (40ft) lengths as 1985/36 and 1985/40 respectively.
	1986 Extends mounting bolts used when installing 1986 bale chamber sensor. Used for newer balers with thick chamber walls.
	315ACC-0003 Power supply kit, to install the FX-2000 moisture meter in your tractor cab. Includes power supply, cable and mounting hardware.

Hay moisture meter, FX-2000

Downloads & Videos

Manual:
Brochure:

Hay moisture meter, FX-2000

Information request

Hay moisture meter, FX-2000

Top

Copyright © 2025 Delmhorst Europe – All rights reserved | sitemap