BD-2100 building materials moisture meter - Inspection





Moisture meter

Name:
BD-2100 building materials moisture meter - Inspection

Material:
Wood, Flooring, Ceiling, Concrete, Drywall, Plaster, EIFS, Roofing, Insulation

Mc:
6-40% on wood
0,2-50% on gypsum
0-100 on a relative basis for non-wood materials

Calibrations:
Wood, Gypsum

Overview
The best-selling BD-2100 is a versatile moisture tester. Besides testing the moisture content on wooden building materials, it also can be used on gypsum, concrete, sheetrock and other construction materials.

The BD-2100 has a digital display, an adjustable alarm, and Delmhorst’s exclusive calibrated drywall scale as well.

Your Benefits:
  • Bright, clear digital display
  • Three scales:
  • •Wood Scale - 6% - 40% moisture range. Use for flooring and building material, such as wood studs, floor joists, subfloors
    •Reference Scale - Reads from 0 - 100 on a relative basis. Use on non-wood materials, such as concrete, plaster, and insulation
    •Gypsum Scale - 0.2%-50% moisture range. Use on drywall
  • Averages up to 100 accumulated readings
  • Built-in calibration check
  • Audible, adjustable alarm alerts you when your pre-selected MC has been reached
  • Integral contact pins mounted on top of meter provide 8mm (5/16”) penetration
  • Built-in connector accepts any Delmhorst electrode
  • Size: 20x8x4cm (8x3x1⅝”)
  • Weight: 285gr. (10 oz)
  • Rugged construction ensures years of reliable use
  • Sturdy plastic carrying case
  • 9V battery
  • 1-year warranty

Special Packages:

Moisture meter BD-2100 Package:
Includes meter, carrying case, extra contact pins for the meter, and 21-E electrode.

Moisture meter BD-2100 Flooring Package:
Includes meter, 26-ES electrode, extra contact pins for the meter, extra 496 pins for the 26-ES electrode, and carrying case.

Moisture meter BD-2100 EIFS Package:
Includes meter, carrying case, extra contact pins for the meter, 21-E electrode, (2) 608/001 contact pins, and HP-1 hole punch.

Moisture meter BD-2100 Complete Package:
Includes meter, 21-E electrode, 26-ES electrode, extra contact pins for the meter, extra 496 pins for the 26-ES electrode, and carrying case.
BD-2100 building materials moisture meter - Inspection 

Electrodes
26-ES Wood hammer
Hammer electrode. The 496 contact pins that come with the 26-ES penetrate 29mm (1⅛”) and have insulated shanks so that only the tips are exposed. The pins make contact only at their uncoated tips and provide much more accurate readings of moisture content at various levels of penetration.
Also available as the 26-ED, which includes gauge to measure pin penetration depth.

Benefits
This hammer electrode will easily check high density hardwood that short pins are unable to penetrate. It will also easily penetrate through flooring to plywood sub-floor or concrete.

2-E Building materials
Fitted with the same 8mm (5∕16") penetration pins that are mounted on our pin type meters.

Benefits
Electrode great for hard to read areas.
Use on wood joists and drywall.
15-E Wood
Pin type, with two rows of four pins each, maximum penetration 3mm (⅛"). Penetration can be adjusted according to stock thickness by means of gauge block

Benefits
Used for veneer
22-E
Pin type, comes with A-111 uninsulated contact pins for 38mm (1½") penetration.
Will also accept 496, insulated pins, 29mm (1⅛”) penetration

Benefits
For use on plaster, masonry and wood
21-E
Long pin type. The 608 pins that come with the 21-E are insulated, except at the tips, and can reach a maximum penetration of 8.25cm (3¼"). The 21-E is also available as 21-E/001 with 15.25cm (6") penetration, or as the 21-ET with a tapped handle for hard to reach areas.

Benefits
For use on roofs, insulation, or EIFS
19-E/STC
Features two 13cm (5'') long blades, bent to a 35° angle, and coated in Teflon except for the tips

Benefits
Great for checking behind trim and baseboard molding
BD-2100 building materials moisture meter - Inspection

Accessoires
MCS-1
Moisture content standards are great for verifying that your Delmhorst moisture meter is in calibration. The MCS-1 can be used on any meter with a wood scale. With two electrical resistance values (12% and 22%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy.
HP-1
Hole punch to make pilot holes in stucco to reduce pin damage.
2497/A-100
Uninsulated pin and retainer with 8mm (5/16") penetration.
Standard on all meters with built-in pins and the 2-E and 4-E electrodes.

Used on wood up to 38mm (1 ½”), concrete and gypsum.
496
496 contact pins are insulated except at the tips, and measure 5cm (2") overall with 29mm (1 1/8") penetration.
Standard on the 26-ES.

Used to check wood up to 13cm.
1849
An alternate to the 496 pin for the 26-ES, the 1849 is a 38mm (1½”) insulated pin with 13mm (1/2") penetration.

The 1849 is suitable for wood up to 5cm (2") thick.
A-111
Another alternative to the 496, the A-111 is an uninsulated contact pin measures 36mm (1 7/16”) and has 1,3cm (1/2") penetration.
The A-111 is compatible with both the 26-ES and the 22-E, and its tapered point makes it easier to penetrate into hard surfaces.

Can be used on wood up to 5cm (2") thick.
632/4
Retainer used to hold contact pins in place.

Used with # 496, # 1849, and # A-111 pins.
BD-2100 building materials moisture meter - Inspection

Downloads & Videos
Manual:Download pdf
Brochure:Download pdf




BD-2100 building materials moisture meter - Inspection

Information request

Product group Building materials
MaterialBuilding inspection
Product

BD-2100 building materials moisture meter - Inspection

Full name*
Company*
Country
Phone
Email*
Message*
2 + 1*


BD-2100 building materials moisture meter - Inspection


Top

Copyright © 2024 Delmhorst Europe – All rights reserved | sitemap